AeroSPARK - The Machine Inventor Program

A Video Documentary about the AeroSPARK Program

ENTHIRAN - The Young Inventor

Enthiran


Rs. 28000

Rs. 500
(The registration fees will be reduced in the fees on your full fees payment)
Level - 1 "Engineering of Flying Objects"
We have our well-structured course titled 'Engineering of flying objects for young minds' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the aircraft models, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.

In this level the every student will be capable of fly any object in air . We will provide the following materials
  • Four paper planes
  • Group kite
  • Mini hot air balloon
  • Mini parachute
  • Group Glider
  • CG Gliders
  • Symmetry Glider
  • Aspect Ratio Glider
  • Rubber power plane
  • Aero spark experimental book

  • For each student for the practical class.

    Once the program started our technical developers will teach students how the aeroplane is fling in the air? and how our science we learned is used in making & flying an aeroplane.

    Student will be capable of make any gliders irrespective of its size & materials.


    Certificate of excellence will be provided by SPARK - Research and Development organization.


    Level - 2 "Division of Mechanical Engineering"
    We have our well-structured course titled 'Division of Mechanical Engineering' targeting students right from the 6th grade. The Program involves in the Relating Science & Engineering using Aspect Ratio so that we will make the student to create Future machines. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To design the mechanical product we want to know the seven segments of mechanical Engineering they are

  • Aspect ratio
  • Design
  • Structure
  • Constrain
  • Aero dynamics
  • Mechanism
  • Propulsion

  • The student should know this seven segment means they can easily design the any new mechanical product.

    In this level the student can do experimental workshops practical classes like

  • Structure glider
  • Aerodynamic dihedral glider
  • Aerodynamic winglet glider
  • Hot air balloon
  • Crane
  • Compressed Air Rocket
  • AeroSPARK II Level Experimental Workbook


  • Certificate of excellence will be provided by SPARK - Research and Development organization


    Level - 3 "Construction of Machine"
    We have our well-structured course titled 'Construction of a Machine' targeting students right from the 7th grade. The Program involves in the combining the Seven Segments (aspect ratio, design, structure, constrain, aero dynamics, mechanism, propulsion) to construct a RC Aeroplane, so that we will make the student to construct any machine. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will make RC Plane. The seven segments of Mechanical product should be combined together to design a RC Aeroplane. We will provide the following materials

  • Coroplast sheet for Fuselage
  • Coroplast sheet for Wing
  • Coroplast sheet for Horizontal Stabilizer
  • Coroplast sheet for Vertical Stabilizer
  • Copper rods
  • Hinges
  • Flex Quick
  • Nut & bold
  • AeroSPARK Level 3 Experimental Workbook


  • For Testing

  • Transmitter & Receiver
  • Bldc Motor
  • Electronic Speed Controller
  • Servos
  • Lipo Battery

  • Every students capable of construct any mechanical product, once they complete the "construction of a Machine" Level.

    Certificate of excellance will be provided by SPARK - Research and Development organization.


    Level - 4 "Industrial Design"
    We have our well-structured course titled 'Industrial Design' targeting students right from the 8th grade. The Program involves in designing any sort of machine industrial standard using CATIA V5 Software. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level students involve in

  • Sketch
  • Part Modelling
  • Assembly
  • Drafting
  • Aeromodelling Level 4 Experimental Workbook


  • Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 5 "Controlling of a Machine"
    We have our well-structured course titled 'Controlling of Machines' targeting students right from the 5th grade. The Program involves in controlling any sort of machines using Transmitter & Receiver. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will learn to control the machine using the transmitter and receiver. To controlling the machine we will train the students using the simulation software Real Flight 7.

  • Air Race (10 Levels)
  • Spot Landing (10 Levels)
  • Balloon Burst (10 Levels)
  • Limbo (10 Levels)

  • After the practices we will train the students to control the

  • Hovercraft
  • Quadcopter
  • Robot
  • Rc Car
  • Rc Crane
  • using transmitter and receiver.

    Certificate of excellance will be provided by SPARK - Research and Development organization.


    Level - 1 "Build Any Circuit"
    We have our well-structured course titled 'Build Any Electronics' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the Basic Electronic components, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To Create Electric Circuit one should know to read the Electronic Circuit. So Electronic circuit theory will be handled in this level. This theory is very important to design an electric product. We can provide the components like

  • breadboard
  • transistor
  • resistor
  • IC`s
  • capacitor
  • wires
  • microprocessor
  • microcontroller
  • diode
  • transformer
  • inductor
  • relay
  • switch
  • ElectroSPARK Level I Experimental Workbook

  • To do the electric circuit practically.
    After completing this level the student can do any electric circuit using the breadboard.

    Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 2 "Build Own Circuit"
    We have our well-structured course titled 'Build your own electronics' targeting students right from the 6th grade. The Program involves in the Creating an Own Basic Circuit. In creating a new circuit, student will involve in calculating the value for the following electronic components

  • Transistor
  • Resistor
  • Capacitor
  • Diode
  • Transformer
  • relay
  • Ldr & Thermistor Sensor
  • Led
  • Motor


  • Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    After completing this level the student should design the any basic electronic product.

    Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 3 "Industrial Oriented Circuit Design"
    We have our well-structured course titled 'Industrial Oriented Circuit Design' targeting students right from the 7th grade. The Program involves in the Creating a Circuit with time, counting & logical conditions. In creating a new circuit, student will involve in calculating the value for the following electronic components. We teach how to create an international standard of product manufacturing that means PCB manufacturing for the designing product.

    In creating a new circuit, student will involve in calculating the value for the following electronic components.

  • Transistor
  • Resistor
  • Capacitor
  • Diode
  • Transformer
  • relay
  • IR Module Sensor
  • Led
  • ElectroSPARK Level III Experimental Workbook


  • Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    After completing this level the student should design any Electronic product without programming.

    Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 4 "Programming the Artificial Brain"
    We have our well-structured course titled 'Programming the Artificial Brain' targeting students right from the 5th grade. The Program involves in the Programming the Artificial Brain The IC.

  • Basic C programming
  • Arduino UNO
  • Digital Pin Access
  • Analog Pin Access
  • Timer
  • Analog to Digital Access
  • Loop
  • Interrupt


  • Student will involve in Programming the IC, the following electronic components are required for programming

  • Arduino UNO Board
  • Arduino Uno IDE Software
  • Variable Resistor
  • Motor
  • Jumping wires
  • Leds
  • ElectroSPARK Level IV Experimental Workbook


  • After completing this level the student capable of Program the Microcontroller.

    Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 5 "Electronic Product Planning Management"
    We have our well-structured course titled 'Electronic Product Planning Management' targeting students right from the 5th grade. The Program involves in the Planning the entire circuit with the given requirement. The student involves in

  • Literature Survey
  • Sensor Choosing
  • Circuit Planning
  • Electronic Material Choosing
  • Microcontroller Choosing
  • Microcontroller Programming
  • Pcb Designing & Production


  • After completing this level the student capable of Plan the Electronic product Planning Production.

    Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    Internship certificate provided by SPARK - Research and Development organization.



    VILANGAN - The Young Innovator

    Vilangan


    Rs. 20000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    This project is a self-stabilizing hexacopter vehicle. The design of the hexacopter will have six rotors to provide stable lift even in highly variable environments (i.e. outdoors). Its main feature will be a camera mounted on the hexacopter which will be able to recognize a person and follow them at a specific distance. Key ideas of this project include synchronization, providing equal lift to all rotors and compensating for any external forces acting upon it. The hexacopter will be autonomous, it will be able to stabilize without any input from humans. The hexacopter will be able to be controlled by a phone connected via Bluetooth and we will provide an Android application that will send data to the hexacopter for control. The hexacopter will be able to locate a face and follow the person. As its name suggest, it will be a six-wing design.

    Level - 1 "Engineering of Flying Objects"
    We have our well-structured course titled 'Engineering of flying objects for young minds' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the aircraft models, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.

    In this level the every student will be capable of fly any object in air . We will provide the following materials
  • Four paper planes
  • Group kite
  • Mini hot air balloon
  • Mini parachute
  • Group Glider
  • CG Gliders
  • Symmetry Glider
  • Aspect Ratio Glider
  • Rubber power plane
  • Aero spark experimental book

  • For each student for the practical class.

    Once the program started our technical developers will teach students how the aeroplane is fling in the air? and how our science we learned is used in making & flying an aeroplane.

    Student will be capable of make any gliders irrespective of its size & materials.


    Certificate of excellence will be provided by SPARK - Research and Development organization.


    Level - 2 "Division of Mechanical Engineering"
    We have our well-structured course titled 'Division of Mechanical Engineering' targeting students right from the 6th grade. The Program involves in the Relating Science & Engineering using Aspect Ratio so that we will make the student to create Future machines. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To design the mechanical product we want to know the seven segments of mechanical Engineering they are

  • Aspect ratio
  • Design
  • Structure
  • Constrain
  • Aero dynamics
  • Mechanism
  • Propulsion

  • The student should know this seven segment means they can easily design the any new mechanical product.

    In this level the student can do experimental workshops practical classes like

  • Structure glider
  • Aerodynamic dihedral glider
  • Aerodynamic winglet glider
  • Hot air balloon
  • Crane
  • Compressed Air Rocket
  • AeroSPARK II Level Experimental Workbook


  • Certificate of excellence will be provided by SPARK - Research and Development organization


    Level - 3 "Construction of Machine"
    We have our well-structured course titled 'Construction of a Machine' targeting students right from the 7th grade. The Program involves in the combining the Seven Segments (aspect ratio, design, structure, constrain, aero dynamics, mechanism, propulsion) to construct a RC Aeroplane, so that we will make the student to construct any machine. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will make RC Plane. The seven segments of Mechanical product should be combined together to design a RC Aeroplane. We will provide the following materials

  • Coroplast sheet for Fuselage
  • Coroplast sheet for Wing
  • Coroplast sheet for Horizontal Stabilizer
  • Coroplast sheet for Vertical Stabilizer
  • Copper rods
  • Hinges
  • Flex Quick
  • Nut & bold
  • AeroSPARK Level 3 Experimental Workbook


  • For Testing

  • Transmitter & Receiver
  • Bldc Motor
  • Electronic Speed Controller
  • Servos
  • Lipo Battery

  • Every students capable of construct any mechanical product, once they complete the "construction of a Machine" Level.

    Certificate of excellance will be provided by SPARK - Research and Development organization.



    Certificate provided by SPARK - Research and Development organization.

    Level - 1 "Build Any Circuit"
    We have our well-structured course titled 'Build Any Electronics' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the Basic Electronic components, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To Create Electric Circuit one should know to read the Electronic Circuit. So Electronic circuit theory will be handled in this level. This theory is very important to design an electric product. We can provide the components like

  • breadboard
  • transistor
  • resistor
  • IC`s
  • capacitor
  • wires
  • microprocessor
  • microcontroller
  • diode
  • transformer
  • inductor
  • relay
  • switch
  • ElectroSPARK Level I Experimental Workbook

  • To do the electric circuit practically.
    After completing this level the student can do any electric circuit using the breadboard.

    Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 2 "Build Own Circuit"
    We have our well-structured course titled 'Build your own electronics' targeting students right from the 6th grade. The Program involves in the Creating an Own Basic Circuit. In creating a new circuit, student will involve in calculating the value for the following electronic components

  • Transistor
  • Resistor
  • Capacitor
  • Diode
  • Transformer
  • relay
  • Ldr & Thermistor Sensor
  • Led
  • Motor


  • Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    After completing this level the student should design the any basic electronic product.

    Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 3 "Industrial Oriented Circuit Design"
    We have our well-structured course titled 'Industrial Oriented Circuit Design' targeting students right from the 7th grade. The Program involves in the Creating a Circuit with time, counting & logical conditions. In creating a new circuit, student will involve in calculating the value for the following electronic components. We teach how to create an international standard of product manufacturing that means PCB manufacturing for the designing product.

    In creating a new circuit, student will involve in calculating the value for the following electronic components.

  • Transistor
  • Resistor
  • Capacitor
  • Diode
  • Transformer
  • relay
  • IR Module Sensor
  • Led
  • ElectroSPARK Level III Experimental Workbook


  • Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    After completing this level the student should design any Electronic product without programming.

    Certificate of Excellance will be provided by SPARK - Research and Development organization.



    VAYU - The Young Flyer

    Vayu


    Rs. 10000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    A quadcopter, quadrotor or quad is a type of radio controlled and/or GPS controlled electric helicopter. They are also produced in full scale. Quadcopters generally consist of a central hub from which four radial arms extend at ninety-degree intervals. The ends of each arm are equipped with an upward- or downward-facing outrunner motor driving standard and reverse rotation model airplane propellers or quadcopter-specific propellers. The result is an extremely stable yet nimble model aircraft with high payload capability. This makes the quadcopter an excellent base for aerial photography, FPV flight or as an autonomous flying robot/unmanned aerial vehicle. Each rotor produces both thrust and torque, with rotors one and three rotating clockwise and rotors two and four counterclockwise. This makes the net aerodynamic torque and angular acceleration about the yaw axis exactly zero in much the same manner as a coaxial helicopter. Directional flight is induced by mismatching the balance in aerodynamic torques, i.e., by offsetting the equal thrust of the motors at hover. This eliminates the need for linkages of any kind in a model quadcopter. While the lack of linkages makes a model quadcopter among the simplest of flying models from a mechanical standpoint, the electronics necessary to fly a quadcopter are often extremely sophisticated. Many rely on an inertial measurement unit combining a gyroscope with an accelerometer, barometer and magnetometer. This may be tied into a standard R/C system, a programmable GPS system, a first-person-view system or a combination of any or all of the above.

    Level - 1 "Engineering of Flying Objects"
    We have our well-structured course titled 'Engineering of flying objects for young minds' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the aircraft models, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.

    In this level the every student will be capable of fly any object in air . We will provide the following materials
  • Four paper planes
  • Group kite
  • Mini hot air balloon
  • Mini parachute
  • Group Glider
  • CG Gliders
  • Symmetry Glider
  • Aspect Ratio Glider
  • Rubber power plane
  • Aero spark experimental book

  • For each student for the practical class.

    Once the program started our technical developers will teach students how the aeroplane is fling in the air? and how our science we learned is used in making & flying an aeroplane.

    Student will be capable of make any gliders irrespective of its size & materials.


    Certificate of excellence will be provided by SPARK - Research and Development organization.


    Level - 2 "Division of Mechanical Engineering"
    We have our well-structured course titled 'Division of Mechanical Engineering' targeting students right from the 6th grade. The Program involves in the Relating Science & Engineering using Aspect Ratio so that we will make the student to create Future machines. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To design the mechanical product we want to know the seven segments of mechanical Engineering they are

  • Aspect ratio
  • Design
  • Structure
  • Constrain
  • Aero dynamics
  • Mechanism
  • Propulsion

  • The student should know this seven segment means they can easily design the any new mechanical product.

    In this level the student can do experimental workshops practical classes like

  • Structure glider
  • Aerodynamic dihedral glider
  • Aerodynamic winglet glider
  • Hot air balloon
  • Crane
  • Compressed Air Rocket
  • AeroSPARK II Level Experimental Workbook


  • Certificate of excellence will be provided by SPARK - Research and Development organization


    Level - 3 "Construction of Machine"
    We have our well-structured course titled 'Construction of a Machine' targeting students right from the 7th grade. The Program involves in the combining the Seven Segments (aspect ratio, design, structure, constrain, aero dynamics, mechanism, propulsion) to construct a RC Aeroplane, so that we will make the student to construct any machine. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will make RC Plane. The seven segments of Mechanical product should be combined together to design a RC Aeroplane. We will provide the following materials

  • Coroplast sheet for Fuselage
  • Coroplast sheet for Wing
  • Coroplast sheet for Horizontal Stabilizer
  • Coroplast sheet for Vertical Stabilizer
  • Copper rods
  • Hinges
  • Flex Quick
  • Nut & bold
  • AeroSPARK Level 3 Experimental Workbook


  • For Testing

  • Transmitter & Receiver
  • Bldc Motor
  • Electronic Speed Controller
  • Servos
  • Lipo Battery

  • Every students capable of construct any mechanical product, once they complete the "construction of a Machine" Level.

    Certificate of excellance will be provided by SPARK - Research and Development organization.



    Certificate provided by SPARK - Research and Development organization.


    MACHINE PORIYALAN - The Young Engineer

    Machine Poriyalan


    Rs. 15000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    Level - 1 "Engineering of Flying Objects"
    We have our well-structured course titled 'Engineering of flying objects for young minds' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the aircraft models, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.

    In this level the every student will be capable of fly any object in air . We will provide the following materials
  • Four paper planes
  • Group kite
  • Mini hot air balloon
  • Mini parachute
  • Group Glider
  • CG Gliders
  • Symmetry Glider
  • Aspect Ratio Glider
  • Rubber power plane
  • Aero spark experimental book

  • For each student for the practical class.

    Once the program started our technical developers will teach students how the aeroplane is fling in the air? and how our science we learned is used in making & flying an aeroplane.

    Student will be capable of make any gliders irrespective of its size & materials.


    Certificate of excellence will be provided by SPARK - Research and Development organization.


    Level - 2 "Division of Mechanical Engineering"
    We have our well-structured course titled 'Division of Mechanical Engineering' targeting students right from the 6th grade. The Program involves in the Relating Science & Engineering using Aspect Ratio so that we will make the student to create Future machines. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To design the mechanical product we want to know the seven segments of mechanical Engineering they are

  • Aspect ratio
  • Design
  • Structure
  • Constrain
  • Aero dynamics
  • Mechanism
  • Propulsion

  • The student should know this seven segment means they can easily design the any new mechanical product.

    In this level the student can do experimental workshops practical classes like

  • Structure glider
  • Aerodynamic dihedral glider
  • Aerodynamic winglet glider
  • Hot air balloon
  • Crane
  • Compressed Air Rocket
  • AeroSPARK II Level Experimental Workbook


  • Certificate of excellence will be provided by SPARK - Research and Development organization


    Level - 3 "Construction of Machine"
    We have our well-structured course titled 'Construction of a Machine' targeting students right from the 7th grade. The Program involves in the combining the Seven Segments (aspect ratio, design, structure, constrain, aero dynamics, mechanism, propulsion) to construct a RC Aeroplane, so that we will make the student to construct any machine. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will make RC Plane. The seven segments of Mechanical product should be combined together to design a RC Aeroplane. We will provide the following materials

  • Coroplast sheet for Fuselage
  • Coroplast sheet for Wing
  • Coroplast sheet for Horizontal Stabilizer
  • Coroplast sheet for Vertical Stabilizer
  • Copper rods
  • Hinges
  • Flex Quick
  • Nut & bold
  • AeroSPARK Level 3 Experimental Workbook


  • For Testing

  • Transmitter & Receiver
  • Bldc Motor
  • Electronic Speed Controller
  • Servos
  • Lipo Battery

  • Every students capable of construct any mechanical product, once they complete the "construction of a Machine" Level.

    Certificate of excellance will be provided by SPARK - Research and Development organization.


    Level - 4 "Industrial Design"
    We have our well-structured course titled 'Industrial Design' targeting students right from the 8th grade. The Program involves in designing any sort of machine industrial standard using CATIA V5 Software. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level students involve in

  • Sketch
  • Part Modelling
  • Assembly
  • Drafting
  • Aeromodelling Level 4 Experimental Workbook


  • Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 5 "Controlling of a Machine"
    We have our well-structured course titled 'Controlling of Machines' targeting students right from the 5th grade. The Program involves in controlling any sort of machines using Transmitter & Receiver. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will learn to control the machine using the transmitter and receiver. To controlling the machine we will train the students using the simulation software Real Flight 7.

  • Air Race (10 Levels)
  • Spot Landing (10 Levels)
  • Balloon Burst (10 Levels)
  • Limbo (10 Levels)

  • After the practices we will train the students to control the

  • Hovercraft
  • Quadcopter
  • Robot
  • Rc Car
  • Rc Crane
  • using transmitter and receiver.

    Certificate of excellance will be provided by SPARK - Research and Development organization.



    Level - 1 "Engineering of Flying Objects"

    Engineering of Flying Objects


    Rs. 4000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    We have our well-structured course titled 'Engineering of flying objects for young minds' targeting students right from the 5th grade. The Program involves in the Basic Science done practically with the aircraft models, this levels helps the students to understand the basic science that they are going to learn till 10th. And some of the student finds the Engineering and Scientific Skill among them. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.

    In this level the every student will be capable of fly any object in air . We will provide the following materials
  • Four paper planes
  • Group kite
  • Mini hot air balloon
  • Mini parachute
  • Group Glider
  • CG Gliders
  • Symmetry Glider
  • Aspect Ratio Glider
  • Rubber power plane
  • Aero spark experimental book

  • For each student for the practical class.

    Once the program started our technical developers will teach students how the aeroplane is fling in the air? and how our science we learned is used in making & flying an aeroplane.

    Student will be capable of make any gliders irrespective of its size & materials.


    Certificate of excellence will be provided by SPARK - Research and Development organization.


    Level - 2 "Division of Mechanical Engineering"

    Divisions of Mechanical Engineering


    Rs. 4000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    We have our well-structured course titled 'Division of Mechanical Engineering' targeting students right from the 6th grade. The Program involves in the Relating Science & Engineering using Aspect Ratio so that we will make the student to create Future machines. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    To design the mechanical product we want to know the seven segments of mechanical Engineering they are

  • Aspect ratio
  • Design
  • Structure
  • Constrain
  • Aero dynamics
  • Mechanism
  • Propulsion

  • The student should know this seven segment means they can easily design the any new mechanical product.

    In this level the student can do experimental workshops practical classes like

  • Structure glider
  • Aerodynamic dihedral glider
  • Aerodynamic winglet glider
  • Hot air balloon
  • Crane
  • Compressed Air Rocket
  • AeroSPARK II Level Experimental Workbook


  • Certificate of excellence will be provided by SPARK - Research and Development organization


    Level - 3 "Construction of Machine"

    Construction of a Machine


    Rs. 4000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    We have our well-structured course titled 'Construction of a Machine' targeting students right from the 7th grade. The Program involves in the combining the Seven Segments (aspect ratio, design, structure, constrain, aero dynamics, mechanism, propulsion) to construct a RC Aeroplane, so that we will make the student to construct any machine. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will make RC Plane. The seven segments of Mechanical product should be combined together to design a RC Aeroplane. We will provide the following materials

  • Coroplast sheet for Fuselage
  • Coroplast sheet for Wing
  • Coroplast sheet for Horizontal Stabilizer
  • Coroplast sheet for Vertical Stabilizer
  • Copper rods
  • Hinges
  • Flex Quick
  • Nut & bold
  • AeroSPARK Level 3 Experimental Workbook


  • For Testing

  • Transmitter & Receiver
  • Bldc Motor
  • Electronic Speed Controller
  • Servos
  • Lipo Battery

  • Every students capable of construct any mechanical product, once they complete the "construction of a Machine" Level.

    Certificate of excellance will be provided by SPARK - Research and Development organization.


    Level - 4 "Industrial Design"

    Industrial Design


    Rs. 5000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    We have our well-structured course titled 'Industrial Design' targeting students right from the 8th grade. The Program involves in designing any sort of machine industrial standard using CATIA V5 Software. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level students involve in

  • Sketch
  • Part Modelling
  • Assembly
  • Drafting
  • Aeromodelling Level 4 Experimental Workbook


  • Certificate of Excellance will be provided by SPARK - Research and Development organization.


    Level - 5 "Controlling of a Machine"

    Controlling of Machines


    Rs. 5000

    Rs. 500
    (The registration fees will be reduced in the fees on your full fees payment)
    We have our well-structured course titled 'Controlling of Machines' targeting students right from the 5th grade. The Program involves in controlling any sort of machines using Transmitter & Receiver. Our syllabus will surely challenge and stimulate the young minds for future inventions and innovation.�

    In this level the student will learn to control the machine using the transmitter and receiver. To controlling the machine we will train the students using the simulation software Real Flight 7.

  • Air Race (10 Levels)
  • Spot Landing (10 Levels)
  • Balloon Burst (10 Levels)
  • Limbo (10 Levels)

  • After the practices we will train the students to control the

  • Hovercraft
  • Quadcopter
  • Robot
  • Rc Car
  • Rc Crane
  • using transmitter and receiver.

    Certificate of excellance will be provided by SPARK - Research and Development organization.







    SPARK - HTML5 Template

    Ignite the Invention in India, Make in India, Made in India.

    © 2016. SPARK. All rights reserved.